HNTR40 is a multi-purpose rough terrain forklift. It is creative rotate telehandler that is suitable for construction site and some industry area. HNTR40 adopts diesel engine, hydrostatic transmission, pilot control, 4WD full wheels driving, rear wheel steering with out trigger, hydraulic stabilizer for boom placing, stretching and withdrawing, lifting height 15m, rated load capacity 4tons, 360 degree rotate chassis, Max horizontal reach 10500mm(front end of front wheel to load center).It can be used as telescopic forklift loader, crane loader or working platform
HNTR40 is a multi-purposed telescopic forklift with rough terrain ability. It is with three section boom with 360 degree rotate chassis, the max. Lifting height is 15m, max. Load capacity is 4000kg, max. Horizontal reach is 10500mm
Equipped with Dongfeng Cummins turbo-charged engine with common rail fuel system, the machine is powerful, energy-saving and environment-friendly. It can meet the high-efficient operation requirement
The power system is equipped with air-air intercooler, which reduces the inlet temperature of the engine, improve the volume of air inlet, increases the power of the engine
Equipped with hydro-static transmission, the machine is with good self-adaptability and operation ability. All of the hydraulic pump, main valve, hydraulic motor, rotary motor, central rotary joint,Hydraulic cylinder, pilot control valve adopts well-known brand.
| Performance | Technical data | |
| Basic parameter | Max. Lifting height (with out trigger) | 15m |
| Rated load capacity (lifting) | 4000kg | |
| Max. Horizontal reach | 10.5m | |
| Rated load @ Max. Horizontal reach (with out trigger) | 800kg | |
| Load center | 500mm | |
| Operating weight (unloaded with fork) | 16500 kg | |
| Max. Travailing speed (km/hour) | 25 km/h | |
| Swinging speed | 3 rpm(1500rpm) | |
| Transmission system | Transmission type | Hydraulic static transmission |
| Hydraulic (high speed / low speed) | 2 / 2 | |
| Transmission gears | 2F/2R | |
| Gradeability | 30% | |
| Traction force | 80kN | |
| System capacity | Hydraulic oil tank capacity | 300L |
| Fuel tank capacity | 200L | |
| Engine | Model | DF Cummins QSB3.9-C125-30 |
| Rated power | 93kW/2200rpm | |
| Torque | 480 Nm / 1350r/min | |
| Fuel type | Diesel | |
| Emission standard | National Ⅲ | |
| Air inlet cooling | Air-air intercooler | |
| Hydraulic system | Pressure | 28 MPa |
| flow | 300 L/min | |
| Steering system | Steering gear type | load sensing full hydraulic steering |
| Pressure | 16 MPa | |
| Rear axle steering type | Transverse hydraulic cylinder steering structure | |
| Steering angle | 40° | |
| Brake type | Service brake | Clamp-disc brake |
| Brake air pressure | 0.684-0.785 MPa | |
| Parking brake | Air push drum brake | |
| Main dimension | Overall height | 3300mm |
| Overall width | 2570mm | |
| Overall length(with fork) | 7330mm | |
| Wheel base | 2800mm | |
| Front wheel tread | 2030mm | |
| Rear wheel tread | 2030mm | |
| Ground clearance (out trigger) | 350mm | |
| Turning radius (out side) | ≥4800mm | |
| Operating position | Central | |
| Seating type | Car type | |
| Aerial working platform | Length*width*height | 1200×800×970mm |
| Out trigger type | Hydraulic out trigger No. | 2F/2R |
| Working boom | Telescopic working boom | 3-setion |
| Fork | Length*width*thickness | 1000×122×50mm |
| Max. Distance between two forks | 710mm | |
| Front/Rear tilt degree | 12°/ 120° | |
| Standard tire(inflatable) | (Front/Rear) Wheel Number | 2/2 |
| (Front/Rear) driving wheel Number | 2/0 | |
| (Front/Rear) tire dimension | 45×16-20 （36PR） | |